Replacement Parts, Batteries, Fuses

AOXP2 - Manual Flue Pump with Trap

RETIRED

The AOXP2 Manual Flue Pump with Trap is included with our AOX2 Combustion Check Accessory Head. Features a water and contaminant trap to help maximize sensor life. A newly designed bulb stands up to the rigors of flue testing and manual pumps work better in cold weather than electronic pumps.

ASP2 - Static Pressure Probes

The ASP2 Static Pressure Probe two-pack makes taking static pressure measurements in duct work easier, faster and more accurate than using manometer tubes alone.  Features a magnetic flange and directional arrow for hands free use and to ensure proper positioning and optimal performance.  Works with all Fieldpiece manometers.

ATRAP2 - Replacement AOXP2 Water Trap

While our hand pump is built to last for years, a mishap can ruin your work day. We've got you covered with this replacement water trap. The ATRAP2 is the whole water trap replacement assembly for our manual hand pump model AOXP2.  Plan ahead and keep an extra one in your bag.

RAOX9 - Replacement Parts Bag for AOXP2

RETIRED

Maximize the sensor life on your Fieldpiece combustion testing equipment. Change the water trap filters and O-rings when you see signs of wear to keep your meter sensors clean and contaminant free. The RAOX9 comes with replacement water traps, O-rings and replacement thermocouple clips.

RCA2 - Car Charger for SRL2K7 and SRL8

With all the chargers and plugs you have in your service van, one is bound to get left behind, borrowed indefinitely by a co-worker or lost. Whether you need a replacement or an extra charger for your Fieldpiece refrigerant leak detector, the RCA2 will keep you in business when you're on the road. Powers models SRL2K7 and SRL8 while charging.

RCBLD5 - Replacement USB Cable for DL2 and DL3

RETIRED

The RCBLDL5 is a replacement cable for Fieldpiece data logger models DL2 (USB model) and DL3.  Get an extra and keep one in the service vehicle and one in the office.

RCONE - Threaded Barrel Lock Cone

The RCONE is designed to hold the barrel of the SOX3 Combustion Checker firmly in the flue.  It's great for hands free testing, and the threading makes it easy to tighten the stabilizing cone in place.

RCR2032 - Battery Replacement for SIR2, SC52, SC53

When you're at the distributor this is the battery about the size of a nickel. It powers the SIR2, SC53 and SC53. Don't get caught without the power you need when you're on a call, keep an extra one or two RCR2032's in your bag to make your job easier, faster and better.

RF16 - Fuse 4-pack for LT17 and LT16

Replace blown fuses on Fieldpiece HVAC/R multimeter models LT17 and LT16.

RFE2 - 9-inch Flexible Leak Detector Wand Extension

This wand connects to the end of the original snoot on your Fieldpiece refrigerant leak detector to give you greater reach in and around tight places. It is included with Fieldpiece refrigerant leak detector models SRL2K7 and SRL8, along with our ABMK3 blow molded case.

RFL2 - Replacement Filters and O-rings for Fieldpiece Refrigerant Leak Detectors

Fieldpiece filters and O-rings are designed to help protect your refrigerant leak detector sensor and keep it working properly. When the filter swells up and blocks water and other contaminants from reaching the sensor, it's done its job, and it's time for a replacement. You'll find the RFL2 Replacement Filter and O-ring pack at your favorite Fieldpiece distributor.

RFL712 - Fuse for HB74

Replace a blown fuse on Fieldpiece HVAC/R multimeter model HB74.

RFL83 - Fuse 4-pack for LT83 and LT83A

RETIRED

Replace blown fuses on Fieldpiece HVAC/R multimeter model LT83 after serial number 120808 and model LT83A before serial number 70003091.

RFL83A - Fuse 4-pack for LT83A

Replace blown fuses on Fieldpiece HVAC/R multimeter model LT83A after serial number 70003091.

RFM66 - Fuse 4-pack for SC66/67/76, HS 35/36, LT17A, and LT19A

Replace blown fuses on Fieldpiece HVAC/R multimeter models SC6X-76, HS35-36, LT17A and LT16A.

RFM70 - Fuse 4-pack for LT16 and LT16A

RETIRED

Replace blown fuses on Fieldpiece HVAC/R multimeter models LT16 and LT16A.

RFM74 - Fuse 4-pack for LT83, LT83A, LT17 and HB74

Replace blown fuses on Fieldpiece HVAC/R multimeter models LT83, LT83A, LT17 and HB74.

RFS74 - Fuse 5-pack for LT83

Replace blown fuses on Fieldpiece HVAC/R multimeter model LT83 before serial number 120808.

RHD1 - Replacement Heated Diode Refrigerant Sensor for SRL8

Although our heated diode refrigerant leak detector sensor is designed to last up to five years with normal use, our meters generally last a lot longer. This replacement sensor is for the Fieldpiece Heated Diode Refrigerant Leak Detector, model SRL8 and is available from your favorite Fieldpiece distributor.

RL736 - 3-pack Battery Replacement for PLM2

The Fieldpiece Lighted Extension Mirror model PLM2 takes three model RL736 batteries to shine light where you need it when you need it. Keep a set in your service bag so that you can read part numbers in dark places. About 2/3 the size of a dime.

RLR44 - 2-pack Battery Replacement for SPK1, SWT2, SIL2, SIP2

These batteries power several Fieldpiece thermometers. From our probe style portables to our infrared models, keep an extra pack in your service bag to make your job easier, better and faster. About the size of a small button.

RMA316 - Manometer Tube Adapter 3/16” to 5/16”

The RMA316 adapter tubes are designed to work with with Fieldpiece manometers to take the manometer tubes from 3/16" to 5/16" to fit inlet and outlet valves on various models of gas appliances.

RRE2 - 9-inch Rigid Leak Detector Wand Extension

Connect this rigid wand to the end of the original snoot on your Fieldpiece refrigerant leak detector to give you greater reach in and around tight places.  A great tool for testing A-coils and seals. It is included with Fieldpiece refrigerant leak detector models SRL2K7 and SRL8, along with our ABMK3 blow molded case.

RREF16 - Replacement Reflective Tage for SR

The RREF16 replacement reflective tape pack works with our Optical Laser Tachometer model SRMP2. Use according to refector instructions found in the SRMP2 operator's manual.

RSMANK6 - Valve and Knob Kit

The RSMANK6 is a replacement valve and knob kit for the SMAN2 and SMAN3 Digital Manifolds. 

RSO2 - Field-replaceable Oxygen Sensor for SOX3

The SOX3 uses an oxygen smart sensor that is field replaceable. Techs no longer have to send their instruments in for calibration because the oxygen sensor simply twists in and out.

RSOX3 - Barrel, Handle, Thermocouple and Hose for SOX3

The RSOX3 comes with the SOX3, but if it's lost, it can be replaced.  The RSOX3 consists of an 8-foot dual-channel hose, barrel, handle and thermocouple.

RWA2 - Wall Charger for SRL2K7 and SRL8

Whether you need a replacement or an extra charger for your Fieldpiece refrigerant leak detector, the RWA2 works with both the SRL2K7 and SRL8. Keep one in the office and one in your service bag because Fieldpiece leak detectors are operational while charging.