Pocket Tools
From sleek LED extension mirrors and magnets to mini IR thermometers, shirt pocket flashlights, even a basic DMM about the size of a wallet, like all of our products, our pocket tools are designed to help make your job easier, safer and faster. They can also be a lifesaver when you drop a part in that little opening between the basement wall and the unit that hasn’t seen light since the system was installed. There are a lot of quality products packed on this page, but it’s definitely worth the time to check them out.
MDSH1 - Magnetic Parts Dish
This hanging magnet for parts and screws is a great addition to any parts bench and an even better performer in the field. Hang it on the side of a unit or any magnet-compatible metal surface. Right side up, upside down, vertically, it doesn’t matter. The MDSH1 holds screws, tools and more firmly in place and out of the way while you work. It combines a strong magnet with a chrome-finish dish featuring our logotype.
PAL1 - Alligator Clip Extension Tool
RETIRED
Makes lighting pilots a breeze even in under-floor mounted furnaces. Holds a match stick and extends to 24-inches. Chrome finish and pocket clip
PBS2 - Magnetic Parts Grabber
RETIRED
Magnetic Parts Grabber - PBS2
This parts grabber has a strong magnet with a clawed hand gives your arm a 24-inch extension to grab out of reach parts. The claw helps you hook on to the parts for that little bit of extra force to get them moving out from under a unit. The magnet hangs onto them. Works as a great back scratcher too (we’re not kidding). Sleek chrome finish and pocket clip look good in your pocket when not in use.
PLM2 - Lighted Mirror Extension Tool
The mirror adjusts in any direction and makes viewing in tight places possible. The bright LED reflects light off the mirror to shine where you need it. Detach the mirror and use as a standalone flashlight. A new threaded connection keeps light securely turned off when not in use. Read part numbers off the back of a unit, only inches from the wall. A must have for any technician who works in dark areas. The chrome finish makes it look almost as good as it works.
PMG2 - Lighted Magnet Extension Tool
We’ve all dropped screws and parts in the dark, sometimes even our keys end up behind a unit. And that can cost you a lot of precious time on a service call. Problem solved. Pick them up with our new lighted magnet extension tool. This tool has a bright LED flashlight that shines through a donut-hole in the magnet. Don't let the magnet’s size fool you, it has the power to hold and lift (carefully) up to 3.65 lbs. in our non-scientific warehouse tests. New threaded connection keeps light securely turned off when not in use. Excellent for anyone who's ever dropped a screw or bolt on the on a job, especially in dark places.
PRH2 - Digital Psychrometer
For real-time, instant readings techs use everyday, this pocket digital psychrometer is a must have for every HVACR professional. Wet bulb, dry bulb, dew point, and %RH are shown on the backlight, dual display, and measurements can be taken either in the duct, or while walking around.
SIG1 - Gun Style IR Thermometer
Among our most popular IR thermometers the SIG2 Gun-Style Thermometer features a 10:1 field of view. A bright blue backlight and laser guide make taking fast and accurate temperature readings easier, better and faster. The SIG1 comes with a protective lens cap and body wrap. It works faster than thermistor-based temperature instruments and has a range of -22°F to 1022°F. Includes Auto-Power Off to conserve battery life.
SIL2 - Pen Style IR Thermometer with LED Flashlight
The SIL2 is among our most accurate IR thermometers. With a 1:1 field of view and a protective IR lens cap, the SIL2, is as small as a pen and delivers big results. Features automatic data hold, measurements in °F or °C, and has excellent accuracy: ±1.5°F and a resolution of 0.5°F. The SIL2 has a range of -27°F to 230°F and includes Auto-Power Off (APO) to conserve battery life.
SIP3 - Shirt Pocket IR Thermometer
RETIRED
The SIP3 is great for quick air register temps. With a 1:1 field of view, the compact design makes taking accurate temperature readings easier, better and faster. The SIP3 has a 1°F/°C resolution and has a -27°F to 230°F temperature range and features Auto-Power Off (APO) to conserve battery life. It also has a rubberized grip, low battery indicator, and is water resistant.
SIR2 - Infrared Thermometer with Laser Sight
The SIR2 Infrared Pocket Thermometer with Laser Sight is among our most popular IR thermometers. It conveniently fits in a shirt pocket and boasts a 6:1 field of view. The laser guide helps you aim at the target with a reaction time much faster than thermistor based thermometers. Use it immediately after pulling from it from your pocket. A favorite among HVAC/R professionals with a range of -27°F to 482°F.
SNCV1 - Non-contact Voltage Detector
This non-contact voltage detector features an analog feel. The closer the probe is to the voltage source, the louder and brighter the indicators become. Detects AC voltages without contact and features a bright red LED light and buzzer. With a 24VAC to 440VAC range of the SNCV1 offers technicians the ability to test thermostats and other HVAC/R parameter easily. Clips to your shirt pocket and is a quick source to find out whether that line is hot or not.
SPDM1 - Pocket DMM
RETIRED
The SPDM1 features non-contact voltage and include many of the parameters you use every day for HVAC/R field service. The leads store in the back of the body of the instrument. Measures volts AC/DC, ohms, continuity and includes a diode check. A great backup meter and a solid performer in the field.
SPK1 - Pocket Knife Style Thermometer
The SPK1 Pocket Knife Style Thermometer features a sharp tip for punching through flex duct and hangs easily from a vent or thermostat. Pull out the probe rod just like you would a pocketknife. 16 detent position grooves hold the rod at virtually at any angle. The probe rod folds away simply with no cover sleeve to lose. Temperature range: -58°F to 392°F. One of our most popular instruments for HVAC/R field service.
SPK2 - Folding Pocket In-Duct Thermometer
The newly designed SPK2 Folding Pocket Thermometer is great for taking quick air temperatures. It fits directly in your pocket so you're ready for common temperature checking. The folding rod has a hanging hook so you can easily hang it in a duct or on a grille. The large display shows Min/Max/Hold, has measurements in both Fahrenheit and Celsius, and has a low battery indicator. It also quickly calculates T1-T2, as well as features an Auto Power Off function to save battery power on it's already phenomenal 8,000 hours of battery life on one single AA battery!
SPK3 - Rod and IR Temperature Pocket Tool
The SPK3 temperature pocket tool has convenient two-way temperatures with both a folding in-duct Rod temperature and an infrared 8:1 gun. The IR takes quick surface temerature readings, and the Rod measures in the duct easily with a hanging hook for hands-free testing. The SPK3 temperature tool also features max/min/hold functions, a backlight, and a display that flips depending on what temperature mode is chosen. Plus, the SPK3 quickly calculates T1-T2, and it works across both the IR and Rod modes.
Click here for more details on the SPK3
SWT2 - Water Resistant Thermometer
The SWT2 Water Resistant Thermometer has a fixed probe tip with a protective cover. Features a sealed body for field service and a sharp tip for punching through flex duct. The SWT2 has a temperature range of -58°F to 392°F and has a MAX/MIN function to check temperatures without having to keep an eye in the display. A pocket clip, ergonomic shape and easy to read LCD make measuring temperatures easier, better and faster. With a -58°F to 392°F temperature range and the Auto-Power Off function to conserve battery life, the SWT2 is a smart choice for HVAC/R field service.